BGVFX - CLEAR DIPPING DP400 SERIES
- MSDS: BGVFX
- Manufacturer: DUNCAN ENTERPRISES
- Product Name: CLEAR DIPPING DP400 SERIES
- National Stock Number: 6850-00F008434
Product Identification
Product ID:CLEAR DIPPING DP400 SERIES
MSDS Date:01/01/1992
FSC:6850
NIIN:00F008434
MSDS Number: BGVFX
Responsible Party
FRESNO, CA 93727-7819
US
Emergency Phone: 209-445-1222
Info Phone: 209-291-4444
Preparer: CURT SATHRE
Cage: 21546
Contractor
Telephone: 209-291-4444
Cage: 21546
Ingredients
LEAD COMPOUNDS
Fraction By Weight: <21%
OSHA PEL 0.05 MG/CUM
ACGIH TLV: 0.15 MG/CUM
ALKALI BOROSILICATE FRITS *93-1*
CAS: 65997-18-4
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ABRASIVE, CAN SCRATCH EYES.
OVEREXPOSURE TO LEAD MAY CAUSE NERVOUS SYSTEM, KIDNEY, OR BONE
MARROW DAMAGE OR HARM TO THE DEVELOPING FETUS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:WEIGHT LOSS, STOMACH CRAMPS, LOSS OF
COORDINATION, JOINT & MUSCLE PAINS.
First Aid
First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINS. SKIN: WASH W/SOAP &
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Fire Fighting Procedures:NONE. WILL NOT BURN.
Accidental Release
Spill Release Procedures:CLEAN UP PROPERLY W/PAPER TOWELS & A WET
SPONGE.
Handling
Handling and Storage Precautions:WHEN USING, DON'T EAT, DRINK, OR
SMOKE. KEEP SEALED. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:AVOID USING IF PREGNANT OR CONTEMPLATING PREGNANCY.
IF GLAZE SPRAYING REGULAR BLOOD LEAD LEVEL TESTING IS ADVISABLE.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED DUST & MIST RESPIRATOR FOR
LEAD (3M 8710 OR EQUIVALENT).
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL):
RECOMMENDED WHEN SPRAYING.
Eye Protection:REQUIRED.
Other Protective Equipment:PROTECTIVE CLOTHING, SPRAY BOOTH IF IN THE
GLAZE FORM & APPLYING BY SPRAY
Work Hygienic Practices:WASH THOROUGHLY, IMMEDIATELY AFTER SPRAYING.
CLEAN SPRAY BOOTH FILTERS OFTEN.
Supplemental Safety and Health
FRITS ARE PRODUCED FROM THE CHEMICAL REACTIONS WHICH OCCUR DURING THE
HIGH TEMPERATURE SMELTING OF VARIOUS RAW MATERIALS TO FORM A MOLTEN
GLASS. THIS GLASS IS RAPIDLY COOLED & THEN GROUND TO PRODUCE P
OWDERED STRUCTURE OF THE FRIT. EXPOSURETO LEAD IF IT DISSOLVES OUT
OF THE GLASS (OCCURS SLOWLY).
Chemical Properties
Boiling Pt:B.P. Text:212F
Melt/Freeze Pt:M.P/F.P Text:1800F
Spec Gravity:1.7
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORED ODORLESS LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:FOLLOW FEDERAL, STATE, & LOCAL REGULATIONS FOR
DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.